|
|
|
Stinson 108 Cleveland Brake Wheel Pant Doubler and Cutout Pattern Added 4/30/08
This template can be used to
make a doubler and to cut the standard Stinson 108 series wheel pants to
accommodate a modern Cleveland wheel and brake conversion. It was provided
courtesy of Frank Kovacs. The pattern was traced by Ray Lemonn from a doubler he
made for his 108-3 restoration. You can click on the image above for a
full size image, which can be saved and printed on a standard 8 1/2 x 11" sheet of
paper. This is for the standard forward mounting of the brakes specified
in the Cleveland conversion kit. |
